CBS Brakes

Just changed the brake fluid.
I bled the front without any issues but the rear wont bleed down properly.
They lever has a squishy feeling. (air)
I have a service manual and followed the instructions but no success.
I think I missed something because it is a combined braking system.
I don't have a bleeder
I plan on doing as much maintenance as possible myself.
This is one of those maintenance issues I would like to clear up.
Thanks for your help.

Check the rear brake lever feel on another Silverwing.
When I rebuilt our orphan Reflex the spongy feeling of the rear lever after bleeding drove me nuts until I compared the feel to the Silverwing. I arrived at the conclusion that the lever needs enough travel to trip the start relay micro switch.
The first click you here is the brake light switch; the lever should feel somewhat spongy until you hear the second click. If the lever firms after that click is heard, you should be good to go.

I went thru the same thing. Still did not feel right. I was told the rubber brake lines expand some giving that feeling of air in the lines.

got it sorted out.
I had very little brake pads left in the back.
Bled the brakes some more, replaced the pads
brand new bike.
some days life is good

My 2010 silverwings brake levers have had a little squishy feel from the first day when I got it from the Dealer new and they work good.I think Honda pland to make them a little squishy so they do not grab to hard when first aplyed.