ABS blinking

Hey guys

I have a 2009 swt And since i have changed my front wheel bearing And pads i have a faulty ABS signal

I have cleaned thé front sensor And still thé samedi issue

Any idéal how to solve that?

I beleive thé swt And thé silverwing has thé samedi ABS système

Cheers And happy new year

Hi "badaoum",
Have never had a problem with my ABS lite but have had digital instruments/lights on a truck that went blank on me. A simple disconnect/reconnect of the battery ground wire managed to reset everything. Might be a simple fix if it would work. Just a thought. Good Luck!

If you've had the wheel off make sure the ABS ring isn't bent.

Hey guys

I have done a fuse check = all good
I have disconnected the battery for a couple of second = didn't fixed the issue
I made a visual check on the pulser ring = no issue (but didn't measured the gap)

As I have the service book for the Silverwing  (and the SWT in italian) I have tried the troubleshooting procedure (basicaly the same between both version)

I have the following blinking message : (goes on forever)



I am strugling to decode those blinking according to the Service manual book. Can somebody help me translate those blinking into a root cause?


Thanks

I haveeeeeeeeeeeeeeee understood it

1 long blink + 2 short blinks = error code 12

I was expecting 12 blinks :up: :up: :up:

Error code 12 means = FRONT WHEELS SENSOR

I will have a look into the manuals and keep you posted

Thanks